You can quickly fix the high packet loss issue on your Xbox One by restarting your router, using a fast VPN, or avoiding peak gaming times, among other relevant suggestions.
The Xbox One is subject to several challenges, such as connection timeouts, high ping latency issues, high packet loss, and crashes. High packet loss is the nastiest of them all, and you’ll see why in just a few.
Nonetheless, a reliable VPN, such as NordVPN, should fix the issue quickly.
What Causes Packet Loss on Xbox One?
The leading cause of high packet loss on Xbox One is network congestion, occurring when the network can’t accommodate/handle more user traffic.
Therefore, the console loses data in transit to prevent the whole network from crashing.
Other causes of packet loss on Xbox One include improper configuration or server-side leaks.
Packet loss can also be a fault on the user’s end. Issues such as a poor signal, wrong cables, or network interference can cause your connection to drop data packets between the game server and your Xbox One console.
Nevertheless, whether the issue is network congestion or server-side leaks, there’s often a way to fix packet loss.
How Do I Fix High Packet Losses on Xbox One?
Although high packet loss is a nasty issue, there are several methods you can try to resolve the issue. The majority of these methods will only take a minute.
Here are some of the most common ways to fix high packet loss on your Xbox One:
Restart Your Router
Restarting your internet router is essential to improve high packet loss, especially when the issue is on your network server side.
Simply turn off your router, unplug it from the power outlet for a few minutes, and plug it back.
Avoid Peak Server Times
Gaming and network servers will often be overcrowded during peak hours when most performance issues occur.
Peak times are usually between 7:00 pm and 10:00 pm (depending on your time zone) when most gamers are free to play games. So, avoid gaming during these hours to minimize the chances of high packet loss.
Of course, this tip only applies if you have a flexible gaming timeframe.
Otherwise, try the other fixes on this list.
Switch to a Wired Connection
A wired connection will consistently outperform a wireless connection, completing data-heavy tasks with minimal hassles while offering faster speeds.
In other words, switch to an Ethernet cable if your Xbox is connected to the Internet over WiFi, and you should see a drastic improvement.
Restart/Reset Your Xbox One
Disconnect from your home network, restart your Xbox One and reconnect.
Often, this fixes troublesome codes, programs, or pre-existing errors, allowing your console to start on a “clean slate.”
If that doesn’t work, perform a hard reset by pressing your console’s power button till it shuts down. Unplug the power cable and wait a few minutes to re-plug and turn on the Xbox.
Clear the Alternate MAC Address
What this does is remove the MAC address from your port security and configure it to permit packets, adding or passing the port to VLAN.
To clear the alternate MAC address:
- Go to Settings, then Advanced Settings under Network options.
- In the Change Settings option, select “Alternate MAC Address.”
- Choose “Clear.”
Use a VPN
Your final resolve is a VPN if the other solutions haven’t worked.
Not only will it fix the high packet loss issue, but it’ll also ensure added security for your console.
A reliable VPN service will send your data through the tunnel effectively.
Thus, minimizing high packet loss.
Here are the best Xbox One VPNs to reduce high packet loss, improve speeds, and avoid gaming lag on your Xbox One:
- NordVPN – Enjoy fast online gaming speeds on the NordLynx protocol, combined with 5,400+ servers in 59 countries and a robust DDoS protection model.
- ExpressVPN – Enjoy fast gaming speeds on the Lightway protocol and access over 3,000+ servers in 94 countries.
- Surfshark – Pocket-friendly VPN with advanced encryption features, low ping, and fast speeds for streaming 4K content on the Xbox One.
What Is a Good Packet Loss for Xbox One?
Every network experiences packet loss, and the loss range differs from user to user. Nevertheless, there’s a packet loss range that’s considered good.
The standards for packet loss are as follows:
| Packet Loss | Verdict |
|---|---|
| <1% - 1% | Good |
| 1% - 2.5% | Acceptable |
| 10% - >10% | High |
If you’re experiencing high packet loss on your Xbox One console, apply any of the tips above to fix the issue.
How to Check for Packet Loss on Xbox One?
Here’s how to check for packet loss on your Xbox One Console:
- Press the Xbox button on your Xbox controller.
- Select “Settings.”
- Navigate to “Network settings.”
- In the menu on the right, select “Detailed network statistics.”
- Wait for the console to perform the test and provide results.
- If the results determine that you have high packet loss, navigate to any of the above tips to fix the issue.
Conclusion
You now know how to check for packet losses, what a good packet loss is, and how to fix high packet losses on your Xbox One.
Likewise, you can see how a VPN is essential for gaming, fixing packet loss issues, and unblocking restricted titles while ensuring DDoS protection, too.
For these, my go-to VPN is NordVPN.
Try our exclusive, limited-time NordVPN offer today for the best experience.
