Set up PureVPN on your router by subscribing to a PureVPN package plan, installing the app on your supported router, and connecting to a server of choice.
Configuring PureVPN on your router is a great way to ensure the safety and security of all devices connected to your network. This method is especially beneficial if you have devices that don’t have PureVPN compatibility.
Keep reading for more information on configuring PureVPN on different routers, such as Linksys and Tomato.
Setup for PureVPN on Common Routers
The installation process for PureVPN varies for different types and models of routers.
In this section, I’ll discuss setups for the most common routers in the order of difficulty.
Netgear Genie
Difficulty Level: Beginner
To configure PureVPN on Netgear Genie, follow the steps below:
- Log in to the PureVPN member area.
- Click the Subscriptions tab to see your VPN credentials.
- Copy-paste and save them.
- Access your router control panel and click “VPN Client.” Check “Enable VPN Client” and enter the following information:
- VPN Server: PureVPN
- VPN Protocol: Select any
- Country: Select any desired location
- Enter your PureVPN credentials: username and password.
- Click “Connect.”
- You’ve set up PureVPN on your Netgear Genie router!
Linksys
Difficulty Level: Beginner
To enable PureVPN on Linksys, follow the steps below:
- Find your PureVPN credentials for manual configuration.
- Log in to your Linksys router through the gateway address: 192.168.0.1
- Go to Local Network and select “WAN Setup” from the drop-down list.
- Set the connection to “PPTP.”
- Enter the following information:
- DNS 1: 8.8.8.8
- DNS 2: 8.8.4.4
- Insert your PureVPN credentials
- Keep Alive: Always on
- Click “Save.”
- You’ve set up PureVPN on your router!
Tomato
Difficulty Level: Intermediate
If you understand the meaning behind DNS, routers, and IP addresses, you can install PureVPN on the Tomato router hassle-free.
Follow these steps:
- Find your PureVPN credentials for manual configuration.
- Go to the Tomato Control Panel and select “VPN Tunneling.”
- Click “OpenVPN Client,” select “Client 1.”
- Enter the details as indicated below:
- Go to Advanced Tab and enter the details as indicated below:
- Go to the Keys tab.
- Open the following keys in a notepad, manually copy all content, and paste the content into the field:
- Static Key
- Certificate Authority
- Client Certificate
- Certificate Key
- Click “Save,” then select “Start Now.”
You established your PureVPN connection. Verify this VPN connection by clicking the Status tab.
pfSense
Difficulty Level: Expert
The setup process for the pfSense router should only be attempted by users with some technical know-how.
Follow these steps:
- Find your PureVPN credentials for manual configuration.
- Download the required OpenVPN files from PureVPN here and extract them.
- In your router’s control panel, navigate to Cert Manager. You should find this option under System.
- Click “+Add” to add a new CA certificate.
- Enter the details as indicated below: https://pastebin.com/9ifgFcs8
- Click “Save.”
- Navigate to the VPN option. You want to create a new profile.
- Select “OpenVPN.” Select the Clients tab.
- Under the Clients tab, click “+Add.”
- Enter the following details as indicated below:
- Navigate to the Cryptographic Settings and enter the details:
- Navigate to Advanced Configurations, select “IPv4 only,” and click “Save.”
- Navigate to the NAT option under the Firewall tab.
- Select “Outbound.” You should see it next to Port Forward.
- Click Manual Outbound NAT rule generation (AON) Advanced Outbound NAT. It’s the third option under Mode.
- Click “Save” then “Apply Changes.”
- In the Mappings window, change every WAN perimeter to OpenVPN.
- The Mappings window should look as follows:
- Click “Save.”
- Navigate to the Status tab and select “OpenVPN.”
- Confirm your connection status.
You have successfully set up PureVPN on your pfSense router.
What Is the Best Router for PureVPN?
The best PureVPN router depends on what you need.
PureVPN recommends getting a pre-configured VPN router through their partner FlashRouters.
However, if you decide to go router shopping, ensure that the router you get supports PPTP and OpenVPN protocols.
I recommend the Netgear R6400 DD-WRT FlashRouter. It has support for up to 7 device connections. That should be enough to cover all devices in a small apartment.
It also has a powerful processor that is perfect for most users looking to encrypt and decrypt their data.
Why Is PureVPN an Excellent VPN for a Router?
PureVPN is a reliable VPN for your router because it offers:
- Audited ‘Always-On’ No-Logs Policy – Three independent auditors audited and approved PureVPN’s no-logs policy.
- Global Server Network – PureVPN offers a fast-expanding network of 6,500+ servers in 78+ countries worldwide.
- Unlimited Bandwidth – PureVPN ensures you enjoy unlimited bandwidth when streaming, downloading, and gaming.
- Automatic Wi-Fi Protection – Enjoy hassle-free WiFi connection and DDoS protection on your web browser while remaining anonymous daily.
- Bank-Grade Encryption – PureVPN encrypts internet traffic on all your devices, such as smart TVs and mobile phones, so that you enjoy the highest level of protection.
- 24/7 Customer Support – If you run into an issue while installing the VPN, you can contact the support team, that’s available anytime, any day.
- 31-Day Money Back Guarantee – PureVPN offers a 31-day money-back guarantee that you can use if you’re unsatisfied with its VPN service.
Conclusion
PureVPN has excellent compatibility with many routers, though preconfigured routers are ideal. However, any router supporting PTPP and OpenVPN protocols will work fine.
Secure your home today with PureVPN on your router and enjoy enhanced security!
